Yellow Color Second Hand Wheel Loader CAT 966H Excellent Running Condition

 

Excellent running condition

Delivery time: within 7 working days from your payment

Specification

Engine
Make
Model	C11 ACERT
Net Power	262 hp	195 kw
Gross Power	286 hp	213 kw
Power Measured @	1800 rpm
Displacement	677 cu in	11.1 L
Torque Measured @	1400 rpm
Max Torque	896 lb ft	1215 Nm
Number of Cylinders	6
Torque Rise	38 %
Aspiration	Turbocharged
Operational
Operating Weight	52254 lb	23698 kg
Fuel Capacity	100.4 gal	380 L
Hydrauilc System Fluid Capacity	29 gal	110 L
Engine Oil Fluid Capacity	9.3 gal	35 L
Cooling System Fluid Capacity	10.3 gal	39 L
Transmission Fluid Capacity	11.6 gal	44 L
Front Axle/Diff Fluid Capacity	16.9 gal	64 L
Rear Axle/Diff Fluid Capacity	16.9 gal	64 L
Static Tipping Weight	38354 lb	17394 kg
Turning Radius	24.2 ft in	7367 mm
Operating Voltage	24 V
Alternator Supplied Amperage	80 amps
Rear Axle Oscillation	26 degrees
Tire Size	26.5-25
Transmission
Type	Powershift
Number of Forward Gears	4
Number of Reverse Gears	4
Max Speed - Forward	23.2 mph	37.4 km/h
Max Speed - Reverse	23.2 mph	37.4 km/h
Hydraulic System
Pump Type	Piston
Relief Valve Pressure	1000 psi	6900 kPa
Pump Flow Capacity	80.6 gal/min	305 L/min
Raise Time	5.9 sec
Dump Time	1.6 sec
Lower Time	2.4 sec
Bucket
Breakout Force	42300 lb	188 kN
Dump Clearance at Max Raise	10.2 ft in	3086 mm
Bucket Width	10.6 ft in	3220 mm
Bucket Capacity - heaped	5.5 yd3	4.3 m3
Bucket Capacity - struck	4.7 yd3	3.6 m3
Dimensions
Length with Bucket on Ground	29.1 ft in	8855 mm
Width Over Tires	9.7 ft in	2956 mm
Height to Top of Cab	11.8 ft in	3600 mm
Ground Clearance	1.6 ft in	496 mm
Wheelbase	11.3 ft in	3450 mm
Hinge Pin - Max Height	13.9 ft in	4224 mm
Reach at Max Lift and Dump	4.3 ft in	1294 mm

 
 

We also provide almost all kinds of used construction machines in good condition with low price. As follows:

 

Used Excavator 1. HITACHI EX100WD, EX120, EX200-1, EX200-2, EX200-3, EX200-5, EX350, ZAXIS200, ZAXIS230

2. KOMATSU PC60, PC120, PC130-7, PC200, PC210, PC220

3. CAT CAT312B, CAT320B, CAT320C, CAT325B, CAT330B, CAT 330C

4. HYUNDAI, DAEWOO, KEBOLCO, SIMITOMO, etc

Used Bulldozer 1. D6D, D6H, D7H, D7G, D8 K, D8N, D9L

2. KOMATSU D75A-1, D85A-18, D85A-21, D155-1, D155-2, D355, D375

Used Road Roller 1. DYNAPAC CA25, CA30 (weight: 8T-14T)

2. BOMAG BW213D-2, BW217D-2, BW219D-2

Used Wheel Loader: 1. KOMATSU WA300, WA350, WA360, WA380, WA400, WA470

2. CAT CAT936E, CAT950B, CAT950F, CAT966D, CAT 966E, CAT966F

3. KAWASAKI KLD65Z, KLD70, KLD70B, KLD80, KLD85, KLD85Z

4. TCM TCM230, TCM870

Used Motor Grader 1. CAT 12G, 120G, 14G, 140H

2. KOMATSU GD511A, GD605R, GD623A

Used Truck Crane 1. KATO: NK250E, NK350E, NK400E-3, NK500E, NK550E

2. TADANO: TL250E, TL300E, TG500E, TG550E, TG650E

Used Crawler Crane 1. HITACHI KH125 35T, KH180 50T, KH700 150T

2. KOBELCO 7045 50T, 5100 100T, 7150 150T

3. SUMITOMO LS118 50T, LS238 100T, LS248 100T

 

If you are in demand, please do not hestiate to let me know.

 

You are warmly welcomed to send me email or call me for any more information at any time when you feel free.

 

 

Packaging & Shipping

1. Container: The cheapest and fast one ;put the machine into container need disassemble .

2. Flat rack: Often used to ship two wheel loader,max load-bearing is 35tons.

3. Bulk cargo ship: which is better for bigger construction equipment,no need disassemble.

4. RO RO ship: The machine is driven directly into the ship and does not need to be disassembled.

 

1. Container: The cheapest and fast one ;put the machine into container need disassemble .

2. Flat rack: Often used to ship two wheel loader,max load-bearing is 35tons.

3. Bulk cargo ship: which is better for bigger construction equipment,no need disassemble.

4. RO RO ship: The machine is driven directly into the ship and does not need to be disassembled.

 

Our company professionally export all kinds of used construction & engineering machinery for many years, our products including Excavator, Bulldozer, Loader, Crane, Grader, Road roller, Forklift. The brands include , Hitachi, komatsu, Daewoo, Kobelco, Hyundai, Volvo, Kawasaki, KATO, Tadano and so on, we have customers from The Southeast Asia, Africa,The Middle East,The South America,and we are looking for the long and good business relationships with you !

Our Services

 

Pre-Sales Service

We trust that customer satisfaction is the only benchmark to inspect our works.

1.Airport picking

2.Hotel booking

3.Translating and guiding during your visit in Shanghai

 

After-Sales Service:

1. Training how to instal the machine, training how to use the machine.

2. Engineers available to service machinery overseas.

 

FAQ

1. How to guarantee the condition and lifetime of the machine ?
A: We choose good condtion and less hour used machines. We are available for third part certificate of all of the machines.
And they are all available for your inspection in its place.
2. How to have after sale service from us ?
A: We have old suppliers in China, used or new parts are available for us to get, with reasonable price and in short time.
3. How can customers make visit and checking in China ?
A: We arrange everything ready for your jouney in China, welcome your happy visit!~